The Phoenix ZSM 1423 mobile grain dryer has a capacity of 300 tons/day for corn, removing moisture from 24% to 14% in heating-cooling mode.  This dryer is chosen by farmers who plan to dry up to 10,000 tons of grain per season.

_____________________________________________________________________

Optional - an operational galvanized steel hopper and the possibility of installing a third module to increase productivity to 500 tons/day.

_____________________________________________________________________

 The grain dryer is controlled via a touch panel. The basic configuration includes metal supports and a moisture indicator. Service platform for the upper module.

_____________________________________________________________________

The payback period for the dryer is 1-2 years, depending on the volume of grain dried.

The Phoenix ZSM 1434 mobile grain dryer has a capacity of 500 tons/day  for corn when removing moisture from 24% to 14% in heating-cooling mode.  The dryer is chosen by farmers who plan to dry 10,000 tons  of grain per season.

_____________________________________________________________________

In “full heating” mode, the capacity increases to 600+ tons/day.

_____________________________________________________________________

 The grain dryer is controlled via a touch panel. The basic configuration includes metal supports and a moisture indicator. Service platform for the upper module.

_____________________________________________________________________

The payback period for the dryer is 1-2 years, depending on the volume of grain dried.

Recuperation allows warm air from the cooling zone to be used, thereby reducing fuel consumption by up to 25%.

Used in grain dryer models ZSK-02, ZSK-03, ZSK-04.

_____________________________________________________________________

The body is made of hot-dip galvanized steel without welding, which allows it to be used for years under the influence of any atmospheric conditions. 

The roof is designed for models in the ZSK line (ZSK-02, ZSK-03, ZSK-04) and provides reliable protection for grain from precipitation. The design includes an inlet flange for connecting transport equipment.

_____________________________________________________________________

The product is made of hot-dip galvanized steel without the use of welding, which allows it to be used for years under the influence of any atmospheric phenomena. 

The presence of wind protection structural elements ensures uniform drying and microclimate in windy weather. Designed for models of the ZSK line (ZSK-02, ZSK-03, ZSK-04).

_____________________________________________________________________

The product is made of hot-dip galvanized steel without the use of welding, which allows it to be used for years under the influence of any atmospheric phenomena. 

The operational hopper with a capacity of 6 m³ improves grain logistics on the farm and is a ready-to-install product for grain dryers ZSM1412, ZSM1423, ZSM1434. This product reduces grain damage caused by prolonged operation of transport equipment and allows for unloading of bucket elevators, which extends their service life.    

_____________________________________________________________________

Equipped with a latch, support sensors, and all necessary mounting hardware.

_____________________________________________________________________

The hopper is made of hot-dip galvanized steel without the use of welding, which allows it to be used for years under the influence of any atmospheric conditions. 

An additional upper module for the ZSM1412 model allows you to double the productivity of the grain dryer and expand to the ZSM1423 model.

_____________________________________________________________________

This upgrade is most rational for farmers who previously purchased the ZSM1412 grain dryer and over time expanded their own crop areas, as well as decided to provide commercial services for grain drying.

_____________________________________________________________________

It should be noted that two such modules can be connected, thus expanding to the ZSM1434 model and increasing productivity to 500 tons/day. Detailed information can be found in the table below.

The Phoenix ZSP mobile batch grain dryer has a capacity of 50 tons/day  for corn when removing moisture from 24% to 14%.  This dryer is chosen by farmers who plan to dry up to 1,000 tons  of grain per season.

_____________________________________________________________________

 The advantage of this model is its small capacity, which allows you to start the drying process with 5 tons of wet grain.

_____________________________________________________________________

 Control is carried out using a button panel located directly on the dryer body. The basic configuration comes with metal supports and a propane-butane burner.  

The Phoenix ZSK-02 mobile grain dryer has a capacity of 200 tons/day for corn, reducing moisture content from 24% to 14%. This dryer is chosen by farmers who plan to dry 1,000-3,000 tons of grain per season.

_____________________________________________________________________

Among the options, we recommend paying attention to heat recovery, which allows you to save up to 25% of fuel, in our case LPG. An additional module is installed to increase productivity. It is also possible to retrofit wind protection (eliminates the influence of wind on the uniform distribution of heat across the columns) and a roof (to protect the loaded product from precipitation).

_____________________________________________________________________

The grain dryer is controlled via a touch panel. The basic configuration includes a wet grain hopper and a moisture indicator.

_____________________________________________________________________

The payback period for the dryer is 1-2 years, depending on the volume of grain dried.

The Phoenix ZSK-03 mobile grain dryer has a capacity of 300 tons/day for corn, removing moisture from 24% to 14%. This dryer is chosen by farmers who plan to dry 3,000-5,000 tons of grain per season.

_____________________________________________________________________

 Among the options, we recommend paying attention to heat recovery, which allows you to save up to 25% of fuel, in our case LPG. It is also possible to retrofit wind protection (eliminates the influence of wind on the uniform distribution of heat across the columns) and a roof (to protect the loaded product from precipitation).  

_____________________________________________________________________

The grain dryer is controlled via a touch panel. The basic configuration includes a wet grain hopper and a moisture indicator.

_____________________________________________________________________

The high-quality exterior coating of the dryer and the use of stainless steel screens ensure a long service life.